Published at Monday, April 09th 2018, 05:26:37 AM. Bookshelf By Patrick.
Wall Mounted Pot Racks are just what the words say. These pot racks are mounted to the wall of your kitchen. So there is a need to have one side of a wall mounted pot rack flush so the pot rack can be mounted firmly against the wall. When mounting a wall mounted pot rack it is advised to mount it into the stud inside the wall for maximum weight support.
Published at Monday, April 09th 2018, 05:26:17 AM. Bookshelf By Angel.
1. Select An Appropriately-Sized RackSelect a server rack with sufficient internal space to house your current equipment and ensure that you have ample space to accommodate planned future expansion as well as any unplanned equipment purchases. Rackmount equipment is measured in the Electronic Industries Alliance (EIA) standard "Rack Units" or Rack "U". One "Rack Unit" is equal to 1.75" in height. Keep in mind that space for accessories, such as environmental monitoring devices, remote power management devices, rack mount LCD monitors, and battery back-up, may be necessary. For example, if you need to accommodate 20 2U servers, you would likely want to choose a rack with a height of 44U to accommodate accessories such as a 1U patch panel, as well as a 2U UPS back-up battery. A rack’s internal height is measured from the tallest point of any side rail to the bottom chassis; internal depth is measured from the insides of both front and rear doors; and internal width is measured from one side panel to the other. Be sure that the rack’s external dimensions can be accommodated in the floor space allotted for it, check that it can be safely moved through all doorways, and ensure that its placement meets any relevant clearance or safety regulations. As a note, always use appropriate rack-loading techniques, including placing heavy items at the bottom of the rack to prevent a rack from becoming too top-heavy, have a plan about what you want to put toward the front and back of the rack (based on how much you will need to access or remove equipment), and have someone help load equipment that is heavy and/or above the height of your head. (1)
Published at Monday, April 09th 2018, 05:26:13 AM. Bookshelf By Angel.
If you have equipment that isn't listed in Middle Atlantic's component dimensions database, then you'll have to either ship it to Middle Atlantic for measurement, or submit the specifications yourself. Either way, it is extremely important to make sure that you will have adequate rack spaces available.
Published at Monday, April 09th 2018, 05:25:55 AM. Bookshelf By Angel.
Clip display racks are very similar to wire racks, with one major difference: Rather than using any variation of a "peg" from which to hang merchandise, clip racks use "clips" from which to hang merchandise. You can fasten such items as bags chips or other bagged treats to the clips, and customers can spin the rack to see all the goodies you have to offer.
Published at Monday, April 09th 2018, 05:25:32 AM. Bookshelf By Patrick.
If your rack starts to rust, its ability to bear a load is compromised, and you will have to get a new one. This is why homemade racks can be dangerous -- they usually do not have any protection against corrosion, and may not be structurally sound enough to bear a load.