Published at Monday, April 09th 2018, 05:26:37 AM. Bookshelf By Patrick.
Today I am going to give you the opportunity to learn all there is to know about Pot Racks. Keep a pen and paper handy. You might want to take notes. Seriously, by the time you read down to the bottom of this information, you will be an expert in Pot Rackology.
Published at Monday, April 09th 2018, 05:26:17 AM. Bookshelf By Angel.
Rack air conditioners are generally not used in traditional datacenter environments that have adequate CRAC systems. However, if IT equipment will be placed outside of a controlled datacenter environment, such as in a warehouse or factory, rack air conditioners are sometimes used. It is important to keep in mind that rack air conditioners are intended for use in industrial and large spaces, they generate condensation and noise, and they exhaust hot air into the room where the enclosure is located. In a large room, the heat will dissipate. In a smaller room or confined space like a closet, the exhausted hot air from the AC unit can cause the room to overheat. If an AC unit is used in a small room, measures must be implemented to exhaust the hot air from the room. Air conditioner models differ in the amount of cooling output they can provide, so select one appropriate to your needs.
Published at Monday, April 09th 2018, 05:26:13 AM. Bookshelf By Angel.
Racks have traditionally come in 19, 23 and 24 inch mounting widths. Today, the 19 inch is the standard for most applications, including A/V systems. All Middle Atlantic A/V racks have 19 inch wide rackmounts. The 19 inch mount is just the internal mounting width from rail to rail. Overall width depends on the kind of rack. For bigger heavy-duty rack enclosures that will need a thick steel frame to hold larger, heavier equipment, or to run cabling down the side you can expect the overall width to be around 22-23 inches or more. For a simple system with 4 or 5 consumer electronic components, you may need a smaller, slimmer rack with as little as 19.125 inches of width. Remember that the width of the mounting shelf or rack ears on the piece of equipment that you are mounting have to be compatible with 19 inch wide rackmounts.
Published at Monday, April 09th 2018, 05:25:55 AM. Bookshelf By Angel.
Clip display racks are very similar to wire racks, with one major difference: Rather than using any variation of a "peg" from which to hang merchandise, clip racks use "clips" from which to hang merchandise. You can fasten such items as bags chips or other bagged treats to the clips, and customers can spin the rack to see all the goodies you have to offer.
Published at Monday, April 09th 2018, 05:25:32 AM. Bookshelf By Patrick.
If your rack starts to rust, its ability to bear a load is compromised, and you will have to get a new one. This is why homemade racks can be dangerous -- they usually do not have any protection against corrosion, and may not be structurally sound enough to bear a load.