Published at Monday, April 09th 2018, 05:26:37 AM. Bookshelf By Patrick.
Wall Mounted Pot Racks are just what the words say. These pot racks are mounted to the wall of your kitchen. So there is a need to have one side of a wall mounted pot rack flush so the pot rack can be mounted firmly against the wall. When mounting a wall mounted pot rack it is advised to mount it into the stud inside the wall for maximum weight support.
Published at Monday, April 09th 2018, 05:26:17 AM. Bookshelf By Angel.
1. Select An Appropriately-Sized RackSelect a server rack with sufficient internal space to house your current equipment and ensure that you have ample space to accommodate planned future expansion as well as any unplanned equipment purchases. Rackmount equipment is measured in the Electronic Industries Alliance (EIA) standard "Rack Units" or Rack "U". One "Rack Unit" is equal to 1.75" in height. Keep in mind that space for accessories, such as environmental monitoring devices, remote power management devices, rack mount LCD monitors, and battery back-up, may be necessary. For example, if you need to accommodate 20 2U servers, you would likely want to choose a rack with a height of 44U to accommodate accessories such as a 1U patch panel, as well as a 2U UPS back-up battery. A rack’s internal height is measured from the tallest point of any side rail to the bottom chassis; internal depth is measured from the insides of both front and rear doors; and internal width is measured from one side panel to the other. Be sure that the rack’s external dimensions can be accommodated in the floor space allotted for it, check that it can be safely moved through all doorways, and ensure that its placement meets any relevant clearance or safety regulations. As a note, always use appropriate rack-loading techniques, including placing heavy items at the bottom of the rack to prevent a rack from becoming too top-heavy, have a plan about what you want to put toward the front and back of the rack (based on how much you will need to access or remove equipment), and have someone help load equipment that is heavy and/or above the height of your head. (1)
Published at Monday, April 09th 2018, 05:26:13 AM. Bookshelf By Angel.
For example: 1U = 1.75 in., 2U = 3.50 in., 3U = 5.25 in.
Published at Monday, April 09th 2018, 05:25:55 AM. Bookshelf By Angel.
Below are five of the most common kinds of rotating racks you can use for your floor displays. Consider the kinds of items you want to showcase and the amount of space you have to work with as you learn more about each one.
Published at Monday, April 09th 2018, 05:25:32 AM. Bookshelf By Patrick.
Overhead racks can carry the largest loads, but they are also heavier, more cumbersome, and often require a more permanent installation. Side ladder racks can be installed more quickly, often feature quick installation to allow you to dismantle them when you no longer need them, and are lighter and easier to carry and set up.