Published at Monday, April 09th 2018, 05:26:37 AM. Bookshelf By Patrick.
How many of you out there are familiar with the different varieties of pot racks available to you? Are you up to date on the types, styles, finish/color, price, brand and size of these amazing kitchen space savers? I thought so.
Published at Monday, April 09th 2018, 05:26:17 AM. Bookshelf By Angel.
1. Select An Appropriately-Sized RackSelect a server rack with sufficient internal space to house your current equipment and ensure that you have ample space to accommodate planned future expansion as well as any unplanned equipment purchases. Rackmount equipment is measured in the Electronic Industries Alliance (EIA) standard "Rack Units" or Rack "U". One "Rack Unit" is equal to 1.75" in height. Keep in mind that space for accessories, such as environmental monitoring devices, remote power management devices, rack mount LCD monitors, and battery back-up, may be necessary. For example, if you need to accommodate 20 2U servers, you would likely want to choose a rack with a height of 44U to accommodate accessories such as a 1U patch panel, as well as a 2U UPS back-up battery. A rack’s internal height is measured from the tallest point of any side rail to the bottom chassis; internal depth is measured from the insides of both front and rear doors; and internal width is measured from one side panel to the other. Be sure that the rack’s external dimensions can be accommodated in the floor space allotted for it, check that it can be safely moved through all doorways, and ensure that its placement meets any relevant clearance or safety regulations. As a note, always use appropriate rack-loading techniques, including placing heavy items at the bottom of the rack to prevent a rack from becoming too top-heavy, have a plan about what you want to put toward the front and back of the rack (based on how much you will need to access or remove equipment), and have someone help load equipment that is heavy and/or above the height of your head. (1)
Published at Monday, April 09th 2018, 05:26:13 AM. Bookshelf By Angel.
Racks are measured and spaced by RMU or "rack mount units" which are always 1.75 inches high. Most commonly, they are referred to by "U" spacing. So for example, a 20U rack will have 20 x 1.75 inch = 35 inches of internal mounting space. Like the external width, the overall height of the rack will be just over the 35, usually not more than a few inches. When you consider your equipment and go to order your shelves, you will need to figure out how many rack units you will need to mount your entire system. When mounting equipment into Middle Atlantic RSH custom shelves, the mounting height of the custom shelf will usually be the next space up from where the actual height of the component is at, unless the next height up is only a few millimeters.
Published at Monday, April 09th 2018, 05:25:55 AM. Bookshelf By Angel.
As the name suggests, pegboard display racks are designed showcase merchandise that hangs from pegs or "hooks"; however, other accessories such as pegboard trays, divider bins, and pegboard buckets work well with these racks and expand the possibilities of the kinds of merchandise you can showcase.
Published at Monday, April 09th 2018, 05:25:32 AM. Bookshelf By Patrick.
Overhead racks can carry the largest loads, but they are also heavier, more cumbersome, and often require a more permanent installation. Side ladder racks can be installed more quickly, often feature quick installation to allow you to dismantle them when you no longer need them, and are lighter and easier to carry and set up.