Published at Monday, April 09th 2018, 05:26:37 AM. Bookshelf By Patrick.
I will begin by saying that pot racks have been used as far back as the 1400's. Back then pot racks were mainly used by lower income families because the kitchens in their homes were small with little to no extra space. These early versions of pot racks were hung on hooks from either the ceiling or one wall in the kitchen. There also were versions that were tripods with hooks for pot and pans, which were placed in one corner of the kitchen floor.
Published at Monday, April 09th 2018, 05:26:17 AM. Bookshelf By Angel.
5. Know Your Cooling StrategyUnderstand the role that server racks play in your complete data center cooling strategy. The type of rack you choose will depend on the cooling methods used in your environment. Baseline kW of heat output per rack varies widely, depending on type and density of equipment, and can be anywhere from 4 kW-12 kW or more per rack, with some experts estimating that the rise of high-density environments and designs for future equipment will result in an output of 30-50 kW per rack. (4)
Published at Monday, April 09th 2018, 05:26:13 AM. Bookshelf By Angel.
Racks have traditionally come in 19, 23 and 24 inch mounting widths. Today, the 19 inch is the standard for most applications, including A/V systems. All Middle Atlantic A/V racks have 19 inch wide rackmounts. The 19 inch mount is just the internal mounting width from rail to rail. Overall width depends on the kind of rack. For bigger heavy-duty rack enclosures that will need a thick steel frame to hold larger, heavier equipment, or to run cabling down the side you can expect the overall width to be around 22-23 inches or more. For a simple system with 4 or 5 consumer electronic components, you may need a smaller, slimmer rack with as little as 19.125 inches of width. Remember that the width of the mounting shelf or rack ears on the piece of equipment that you are mounting have to be compatible with 19 inch wide rackmounts.
Published at Monday, April 09th 2018, 05:25:55 AM. Bookshelf By Angel.
Many store owners use these delightful display fixtures to add charm to their merchandise displays, and they work well for everything from bags of chips and candy to children's toys and trial-sized hygiene products.
Published at Monday, April 09th 2018, 05:25:32 AM. Bookshelf By Patrick.
If your rack starts to rust, its ability to bear a load is compromised, and you will have to get a new one. This is why homemade racks can be dangerous -- they usually do not have any protection against corrosion, and may not be structurally sound enough to bear a load.